How to install a smart toilet

As a frequently used sanitary appliance in our daily life, the quality of intelligent toilet is closely related to our health. Compared with the ordinary toilet, the intelligent toilet brings us a more hygienic and healthy toilet experience, but at the same time, its installation is different from the ordinary toilet. Let me tell you about the installation method of the intelligent toilet.

Note: First, we need to make various measurements before installing the intelligent toilet Ensure that the size of the intelligent toilet meets the size of our toilet, so as to facilitate the smooth installation. At the same time, we also need to check whether the quality of the intelligent toilet is qualified and whether all functions are normal. This is a must before installation. After all, it is meaningless to install a damaged intelligent toilet. It is better for us to install the intelligent toilet with a power socket, which is a necessary condition, because the work of the intelligent toilet requires electricity.

Installation steps:

1. Before installation, check whether the sewage pipe is unblocked and whether the installation ground is clean.

2. Install the matched sealing ring on the drain outlet of the toilet.

3. Determine the location of toilet devices. Gradually put down the toilet (drain outlet) to align with the pipe outlet, adjust the correct position, and then (with chalk or whiteboard pen) locate the device hole on the line around the toilet.

4. Punch the device hole. Align the anchor screw symbol hole, drill the device hole with a percussion drill (10 ㎜ in diameter and 60 ㎜ in depth), and add the expanded rubber nail.

5. Apply glass glue on the inside of the symbolic line.

6. Install the toilet on the device hole and the glass glue around it, and gradually press it down to the horizontal.

7. Apply glass glue on the connection between the toilet and the ground, and trim the surroundings to ensure beauty.

8. Install the anchor screws.

9. Connect the water inlet pipe and check whether the filter has a device.

10. Clean the floor and things, and do not use them immediately (it usually takes 24 hours for glass glue to solidify). Keep the area around the toilet free of water for 24 hours

The above are the specific steps for the installation of the intelligent toilet. I hope it can help you. We kindly remind you to check whether the functions of the intelligent toilet are normal and whether the toilet leaks.