How to set the toilet cover of intelligent toilet mat (automatic change of toilet cover)

Recently, Xiaobian often sees people consulting about how to set and change the automatic toilet cover on the toilet seat. The following small make-up to clean the intelligent pad as an example to share with you!

Intelligent toilet mat, also known as automatic change toilet cover, rotary pad, sanitary pad, etc., can automatically replace disposable toilet cover (sanitary film) through the built-in microcomputer controller. The toilet cover can rotate accurately for one cycle and completely cover the seat ring.

Toilet cover is a kind of disposable material for intelligent toilet pad. It is also called disposable toilet pad, toilet cover, rotary pad film, sanitary roll, disposable roll, disposable membrane, etc. Each time before using the toilet, press the button or sensor or remote control to change the disposable toilet cover. The used toilet cover is cut into rolls and put into the warehouse before recycling, so it can not be used again, which ensures the disposable use of the toilet cover, and users can rest assured of using it.

So how to replace the toilet bag?

1. Open the bin cover and first take out the toilet cover used in the recovery bin;

2. Secondly, the air shaft in the output bin is taken out and installed in the recovery bin;

3. Then put the new cleaning sleeve into the output bin of the main unit,

4. Pull out the toilet cover, pass under the counting wheel and extend to the outside of the bin.

5. Tear a proper length gap on the left side of the toilet cover, then put it into the seat ring and pull it to the recovery bin, fix it on the empty shaft and cover the cabin cover.

6. Start the machine for a trial run, that is to complete the replacement of the toilet cover.

Note: when installing the toilet cover, it must pass under the counter wheel of the output bin, otherwise it will cause the counter failure, no counting or display error.